AUTONET TV

Greeted by a Screech (Loud Noise when Starting Vehicle)

No one likes to be greeted in the morning by having someone screech at you.  The same goes for a loud, high-pitched noise your vehicle greets you with every time you start the engine.  If you're wondering if that's normal, no, it isn't.  And it is worth getting checked out.  The good news is that it might be nothing serious.  Then again, it may be.

The first things to suspect any time you hear a high-pitched sound coming from the engine are belts.  They have tension on them and they're trying to turn lots of different pulleys, pumps and other equipment the engine needs to work properly.  The noise could come from the belts starting to wear out and dry out. If one of those belts breaks at an inopportune time, not only can it strand you somewhere, the damage to the engine could be very expensive to fix.

Other things that will cause a high-pitched sound are the pulleys and tensioners.  The tensioners keep the right amount of pressure on the belts and some pulleys contain rubber that dampens engine vibrations.  The rubber in the pulleys can crack or deform with age, which prevents them from working correctly and may cause your belts to wear out.

A technician will check to see if the belts are worn or cracked.  He or she will also check the tension on the belts, the condition of the pulleys and whether all  components are aligned the way they should be.

Sometimes, the noise is nothing major to worry about, but it's still worthwhile to rule out any problems that have cropped up now or may appear in the future.  You'll have a properly running vehicle that sounds like its engineers intended… quiet and smooth.

AutoChoice Service Center Inc.
2009 S. Yost Ave.
Bloomington, Indiana 47403
812-339-9898

The Light Nobody Wants to See (Check Engine Light)

You've probably had your Check Engine Light go on.  Then it goes off and you figure, hey, whatever the problem was, it's gone now and I don't have to worry about it.  Well, the problem may have gone away and it may not have.

Your vehicle likely has one of these warning lights on the instrument panel: an amber light that looks like an engine or reads "Check Engine" or "Service Vehicle Soon."  If that light comes on and stays on, it usually means there's something amiss but not urgently in need of service.  (Now if it's blinking, that's another story that we'll deal with in a minute.)

Sometimes when it comes on and stays steadily lit, the problem will go away and the light will go out.  Sometimes it will stay on until you get the problem fixed.  Either way, the engine's computer will store a code that can provide clues to what's not working—or wasn't working—the way it's supposed to.

If you are just dying to know what that code is, you can buy a little code reader or take your vehicle to an auto parts store and they'll read it.  Problem is, the code offers so many options that unless you are a trained technician, you probably won't have a clue what those codes mean. 

So if you want to be sure, take it to your vehicle repair facility and have them check it.  Technicians are trained to decipher the codes and, using their experience and other diagnostic equipment, can get to the root of the problem and fix it. 

As we mentioned before, if that Check Engine light comes on and is blinking, it means a more serious engine malfunction that can damage expensive components such as the catalytic converter and even the engine itself.  It's important to have that checked by a professional as soon as possible. 

AutoChoice Service Center Inc.
2009 S. Yost Ave.
Bloomington, Indiana 47403
812-339-9898

Getting from E to F (Fuel Gauge Problems)

Who thinks about their fuel gauge?  You probably don't… until it doesn't work any more.  Then you have to guess how much fuel is in your tank, and that's no way to live life on the road. 

Fuel gauges, like every other part in your vehicle, can fail.  And when yours stops working, you will probably want to head over to your service facility soon, because no one relishes running out of fuel.

The fuel gauge system is much more than just the gauge you can see on your instrument panel. Most systems have a float inside the fuel tank that goes up and down depending on the fuel level.  It's called the fuel sending unit, and it sends an electrical signal to the gauge (on the dash) telling it to display how much fuel is left in the tank. 

So, what could go wrong?  Well, a few things.  For one thing, corrosion from bad fuel can cause it to stick and it won't move up and down any more.  So you could fill up your tank and the gauge would still read Empty.  If a sending unit needs to be replaced, often the parts can be costly. The good news is that fuel sending units rarely fail and most drivers will never have one go bad.

Other things that can go wrong? An electrical problem could cause a fuse to blow and you won't get a reading at all.  A technician can figure out where that electrical problem is and how to repair it.  Finally, it's possible for the gauge itself (on the instrument panel) to fail.

One thing to keep in mind is if your fuel gauge isn't working, you might be tempted to carry around an extra container of fuel.  That's ok if it's outside the cabin, such as in the bed of a pickup.  But if you carry it inside the cabin or trunk, fuel fumes can be very dangerous for your health, even fatal.

A working fuel gauge gives you peace of mind… so you'll never have that "empty" feeling.

AutoChoice Service Center Inc.
2009 S. Yost Ave.
Bloomington, Indiana 47403
812-339-9898

Chilly Warning (Diagnosing a Noise in Cold Vehicle)

When the weather gets colder, sometimes the noises your vehicle makes will change.  For example, you may notice a whining sound when you get going in the morning.  It may go away when the vehicle warms up, but it's best not to ignore that sound because it could be a warning of worse things to come.

Colder temperatures cause different components to behave differently.  Let's take a look at a few of them.  First, the fluids in your vehicle.  Cold temperatures can make them behave a little differently, such as engine oil, transmission fluid and power steering fluid. Those characteristics could change if the fluids are older and full of contaminants.

Belts also can create a whining noise when cold.  Since they turn pulleys that move other things, several factors can create issues.  Increased friction can change proper tensions on belts.  Plus, belts change as they age and may crack, get loose or develop a glazed surface. Belts and pulleys also must be aligned properly to work the way they're designed to.

As you can imagine, it's easier for a technician to diagnose a noise if the vehicle is making it.  And if a vehicle only makes a noise when it's cold, that sound may be gone by the time the vehicle makes it to the repair facility.  That means a driver may have to consider dropping off the vehicle the night before so the technician can be the first to start it the following morning.  Most service facilities can accommodate that with either a drop-off box or other arrangement.  Heed your vehicle's warning when you start to hear unusual noises.  That's a cool idea you should be able to easily warm up to.

AutoChoice Service Center Inc.
2009 S. Yost Ave.
Bloomington, Indiana 47403
812-339-9898