AUTONET TV

Go With the Flow (MAF Sensor Replacement)

A driver brought her vehicle into the shop the other day and told us how she was getting lousy fuel economy and that the engine was running rough.  Plus, the Check Engine light was on.  Our technician checked the code the engine had generated (why the Check Engine light was on) and found the problem.  It was a faulty Mass Air Flow sensor, MAF sensor for short.

This MAF sensor is an important part of your vehicle.  What it does is calculate the amount of air going into your engine.  As you may know, air is taken into your engine where it's mixed with fuel.  Then, the spark plugs fire, that explosive fuel/air mixture detonates, and all these sequential explosions together provide the power to get your vehicle moving down the road. 

It makes sense that if the MAF sensor isn't sending the engine's computers the correct information on the amount of air going in the engine, the fuel/air mixture isn't going to be right. It will either too rich (too much gasoline for the amount of air) or too lean (not enough gasoline for the amount of air).

In this driver's case, the MAF sensor was damaged and needed to be replaced.  Another thing that may cause the MAF to give an incorrect reading is if its wires are dirty or faulty.  So, replacing or cleaning the wires important as well.

Other symptoms that your MAF sensor is bad? If your engine hesitates when you step on the gas, it stalls, or your vehicle is jerky when you accelerate. 

A malfunctioning MAF sensor is not just bad for performance.  Driving with your vehicle in that condition can cause more damage to your engine.  When you bring your vehicle in for us to check, a technician will thoroughly examine your engine to make sure all issues are taken care of.

AutoChoice Service Center Inc.
2009 S. Yost Ave.
Bloomington, Indiana 47403
812-339-9898

Steering You Right (Tie Rod End Replacement)

For drivers, S stands for safety.  And there are three other words that start with S that are all equally important: starting, stopping and steering. For your vehicle to be at its safest, all three functions must be in top shape. 

Steering is one of those things we take for granted.  After all, you turn the wheel and your vehicle changes direction. But sometimes you might notice your steering is a little off.  Maybe you've noticed you turn your wheel slightly and your vehicle doesn't turn. You may feel a little vibration in the wheel that increases when you go faster.  You may hear a little squeak from the wheels when you steer and you may notice your tires aren't wearing evenly.

These are signs that your tie rod ends may be failing. Tie rod ends help connect your vehicle's steering mechanism to the wheels.  They can wear out after you've hit one too many potholes or just from constant use.  They can cause sloppy steering and loose handling, and they should be replaced when they've reached the end of their life span.

If you notice any of these things happening on your vehicle, bring it in to us so a technician can check it out.  There are a couple of different types of steering, recirculating ball steering and the one most of the latest vehicles have, rack and pinion. When we replace your tie rod ends, we will remove and replace the old ones and adjust them to meet your vehicle manufacturer's specifications.

Tie rod ends should often be replaced in pairs, and your vehicle should be aligned afterwards.  Keep your steering working the way it's supposed to, and your vehicle will be sure to steer you right.

AutoChoice Service Center Inc.
2009 S. Yost Ave.
Bloomington, Indiana 47403
812-339-9898

Road Ready (Trip Inspection)

Maybe you've been cooped up for a while and are yearning for a change of scenery.  Or maybe you need to visit a relative who lives far away.  You choose not to fork out the big bucks for airline tickets, so it's time for a road trip.  Make sure you're road ready by having your vehicle professionally inspected before the big drive.

One of our technicians can check out several of your vehicle's most important systems so you can be more confident that you'll be able to go the distance without a breakdown.  Here are a few things a trip inspection may include:

Your vehicle stops with brakes that, in turn, stop the tires.  They must both be in sound condition. The technician can look at your tire tread, the condition of the sidewalls, and note the tires' age.  Brakes have pads and rotors that should meet certain specs, so an expert inspection of their condition is important, too.

A technician can check other vital fluids such as engine coolant, power steering, transmission, and windshield washer fluid. Your wipers must be in good condition so you can see, and they're often one of the most neglected parts of a vehicle. 

Your headlights must work correctly and be aimed properly so you can see and so that you're not blinding oncoming drivers. They're powered by your battery, and a technician will check how old yours is and how well it holds a charge, all important for reliable starting. 

For cabin comfort, your climate control system needs to work correctly, which means both heat and air conditioning.  If things need to be repaired - before the trip will be a lot more convenient than trying to do it while you're traveling.

The technician can inspect hoses and belts, two things that frequently fail on a long trip.  And the big advantage of having a pro look over your vehicle is that they not only know what to look for but also can make the repairs the right way.  Now that's the ticket to being road ready.

AutoChoice Service Center Inc.
2009 S. Yost Ave.
Bloomington, Indiana 47403
812-339-9898

Plugging Away (Spark Plug Replacement)

If you drive a vehicle with a gasoline engine, thank the spark plugs for igniting the gasoline/air mixture in each cylinder that keeps your vehicle traveling smoothly down the road every day.  Your spark plugs work hard, firing thousands of times in a well-choreographed order, and you usually don't pay much attention to them until one of them stops working the way it should.

Signs that spark plugs are wearing out include:

• Engine runs more roughly than it did
• Vehicle doesn't start as easily as it used to
• Vehicle hesitates when you press on the accelerator
• Your fuel economy has gotten worse

When a spark plug stops working altogether, you will find your engine has likely lost a lot of its power and isn't running smoothly.  Your Check Engine light may  come on.  Then it's time to head to come to our service center to have it diagnosed.

If your plugs need to be replaced, they're usually done all at the same time. And if your vehicle has spark plug wires, experts recommend you change them as well. Different type of spark plugs last longer than others, and your service advisor can discuss what's best for your vehicle and driving habits.

A technician will also determine if there are any carbon deposits on your plugs, how healthy the ignition coil is (it's the part that supplies the high-voltage jolt that makes the spark) and will look for other signs and symptoms that may point to other problems in your engine. For instance, if a spark plug is fouled by oily deposits, it's possible oil is getting into the combustion chamber. 

They will also check all the plugs to see if there are problems in just one or all cylinders.  Sometimes a technician will find a plug that has overheated, literally melting the metal.  In that case, they may recommend they correct that problem before replacing the spark plugs.

Most spark plugs will last for a good, long time.  Even if you aren't seeing any symptoms they're wearing out, make sure you have your service advisor check your vehicle manufacturer's recommended maintenance intervals.  Preventative maintenance will keep your vehicle running reliably so you can count on it to get you where you want to go. 

AutoChoice Service Center Inc.
2009 S. Yost Ave.
Bloomington, Indiana 47403
812-339-9898

To Fix or Not To Fix (Tire Repair)

You know that sinking feeling when you realize one of your tires has a problem.  It may be making an odd noise or behaving oddly when you're driving.  You may hit a pothole or curb and one suddenly goes flat.  Or you may head back to your vehicle and discover it has one tire deflated without a clue of what must have happened to it.

With a lot of different tires hitting the streets these days, the issue of whether to have a tire repaired or replaced can be tricky, and we strongly recommend you have a trained technician help you make that decision. 

One of the most common causes of flat tires is picking up a screw or nail in the tread area.  Many of those can be patched and plugged if the puncture isn't more than ¼ inch/6 mm in diameter. Most tires can handle two of this type of repair, but any more and you should buy a new tire. 

If there's a puncture or bulge in the sidewall or shoulder, the rule of thumb is it's not repairable.  The sidewall doesn't have the reinforcements that the tread area does.  In fact, any puncture that's more than a ½ inch/12 mm away from the edge of the tread should not be fixed. 

Many newer vehicles have no spare tires (to save weight and fuel) and instead have a type of tire called "run-flat."  Sometimes, the only way you know they're deflated is when the tire pressure monitor alerts the driver.  Driving on them more than 50 miles/80km can render them un-repairable.  They may be fixable if you pulled off to the side of the road before driving on them too long. Our technicians can evaluate whether they can be driven further or should be replaced.

Other vehicles with no spare include a can of tire sealant and a compressor.  If you use it, tire experts say to have the tire professionally repaired as soon as possible.

If you have had a flat tire, try not to drive on it unless it's necessary to get your vehicle away from a dangerous situation.  Our technicians can evaluate any tire you may be having problems with and recommend whether repair or replacement is the best option. Your safety is riding on your tires.  

AutoChoice Service Center Inc.
2009 S. Yost Ave.
Bloomington, Indiana 47403
812-339-9898